This document lists the supported rail kits for Lenovo ThinkSystem, ThinkAgile, and ThinkEdge servers and allows you to compare the specifications.
How to search
The web page initially displays all available rail kits. Scroll horizontally to view all the controllers. You can also use the search or filter functions to further narrow the results.
To search: Enter a search term and click Search, or click Add Filter to perform more advanced searching. For information on how to view, rearrange and export the data, click the Help link.
Loading, please wait...
Notes
- There are no CMA mounting brackets preinstalled on the rail. The CMA mounting brackets are contained in the CMA option kit package. Before installing the CMA, you need to install the CMA mounting brackets first. For detailed instructions, refer to the documentation that comes with the CMA option kit.
- If you want to install the rails and a 0U PDU into the same rack, the rack must meet the height and depth requirements. See the sections below for details, Rack cabinets with parallel 0U PDUs and Rack cabinets with perpendicular 0U PDUs.
- For best performance, it is recommended that you install the rails to the racks with a 719-mm distance (28.31-inch, Lenovo rack default distance) between the front and rear mounting flanges.
- The rail length refers to the distance measured when the rail is not extended.
Rack cabinets with parallel 0U PDUs
The table below lists the rail kits that are supported in each rack cabinet when 0U PDUs are installed in an orientation that is parallel to the sidewalls of the cabinet (sockets facing the rear of the rack). The table also lists the horizontal clearances A and B, as shown in the figure.
Figure 1. Rack cabinets with parallel 0U PDUs
| Rack MT | Rack depth | Rail selection | A 1 | B 2 |
|---|---|---|---|---|
| 9307 | 1000 mm (39.37 inches) |
Supporting CMA and PDU installation:
|
746.65 mm (29.39 inches) |
-23.50 mm 3 (-0.92 inches) |
|
Supporting PDU installation only:
|
||||
| 9308 | 1100 mm (43.31 inches) |
Supporting CMA and PDU installation:
|
772.50 mm (30.41 inches) |
8 mm (0.31 inches) |
|
Supporting PDU installation only:
|
||||
| 9363 | 1100 mm (43.31 inches) |
Supporting CMA and PDU installation:
|
787.50 mm (31 inches) |
11 mm (0.43 inches) |
|
Supporting PDU installation only:
|
||||
| 9360 9361 |
1200 mm (47.24 inches) |
Supporting CMA and PDU installation:
|
889.5 mm (35.02 inches) |
-6 mm 3 (-0.24 inches) |
Supporting PDU installation only:
|
||||
| 7D6D 7D6E |
1200 mm (47.24 inches) |
Supporting CMA and PDU installation:
|
885 mm (34.84 inches) |
7.91 mm (0.31 inches) |
|
Supporting PDU installation only:
|
Notes:
- 1Item A refers to the recommended distance between the front surface of the front mounting flange and the front surface of the parallel 0U PDU.
- 2 Item B refers to the distance between the left (right) side of the CMA and the right (left) side of the parallel 0U PDU.
- 3 The negative distance indicates that the CMA and the parallel 0U PDU have an overlap.
Rack cabinets with perpendicular 0U PDUs
The table below lists the rail kits that are supported in each rack cabinet when 0U PDUs are installed in an orientation that is perpendicular to the sidewalls of the cabinet (sockets facing the center of the rack). The table also lists the horizontal clearances A and B, as shown in the figure.
Figure 2. Rack cabinets with perpendicular 0U PDUs
| Rack MT | Rack depth | Rail selection | A * |
|---|---|---|---|
| 9307 | 1000 mm (39.37 inches) |
Supporting CMA and PDU installation:
|
808.65 mm (31.84 inches) |
|
Supporting PDU installation only:
|
|||
| 9308 | 1100 mm (43.31 inches) |
Supporting CMA and PDU installation:
|
850.05 mm (33.47 inches) |
|
Supporting PDU installation only:
|
|||
| 9363 | 1100 mm (43.31 inches) |
Supporting CMA and PDU installation:
|
871.67 mm (34.32 inches) |
|
Supporting PDU installation only:
|
|||
| 9360 9361 |
1200 mm (47.24 inches) |
Supporting CMA and PDU installation:
|
992.5 mm (39.07 inches) |
|
Supporting PDU installation only:
|
|||
| 7D6D 7D6E |
1200 mm (47.24 inches) |
Supporting CMA and PDU installation:
|
969.1 mm (38.15 inches) |
|
Supporting PDU installation only:
|
Note: * Item A refers to the recommended distance between the front surface of the front mounting flange and the side of the vertical 0U PDU.
Related product families
Product families related to this document are the following:
Help
This page provides guidance how to use the features of the Lenovo Press comparison tool.
Topics
Searching
You can use the search field either as the primary search mechanism or use it in conjunction with the advanced filters to further filter down results. The search field searches all text for matches.
| Search | Purpose |
|---|---|
| Intel 480gb | Returns all entries that have both words, "intel" and "480gb" |
| nvme available | Returns all entries that have both words, "nvme" and "available". Some comparisons include product announcement and product withdrawal data along with an availability statement. Such comparisons will allow you to therefore search on keywords "available" or "withdrawn". |
| samsung or micron | Returns all entries that have either "samsung" or "micron" in them |
| 4XB7A08502 | Returns the entry with this part number |
| 4XB7A0850* | Returns all entries with a part number that starts with 4XB7A08502 (* is the wildcard character) |
| hgst "2.5-inch" | Use double quotes to search for a phrase. Needed with the text includes a period or hypen |
Filtering
Filtering allows you to perform an advanced search based on specific fields (rows) of the data. All filters are logically ANDed together. Simply click the Add Filter button and select the Attribute and possible values you want.
- For text fields, either type in a text string or select one from the pulldown (you cannot select multiple)
- For numeric fields, select the operator (equals, less than, greater than, or between), then type in or select a value (or 2 values for the between operator)
- For date fields, select the operator (equals, less than, greater than, or between), then type in or select a value (or 2 values for the between operator). You can pick the dates from a calendar picker or type in the dates. The date format required is US format - mm/dd/yyyy.
To use the filter functions, do the following:
- Click the Add Filter button
- Select the attribute you want to filter on.
- If the data you want to filter on is text, you are prompted to either enter a value or you can select from the list
- If the data you want to filter on is numeric, you are prompted to specify an operator (default is =) and enter any number or select from existing values
- If the data you want to filter on is a date, you are prompted to specify an operator (default is =) and enter or select a date:
- You can add additional filters by clicking the Add Filter button. All filters are logically ANDed together.
- You can delete a filter by clicking the red X button to the right of that filter.
- Once you are ready to filter, click the Search button.
Alternatively, you can use the filter functions directly in the column headings:
Tip: The Filter menu appears at the attribute heading. By default, this is the row headings, however if you transpose the data (click the Transpose button), then the Filter menu appears in the column heading instead.
- Click the ˅ symbol in the row or column you want to filter on
- Click Filter and then select the value(s) you want shown
- Click the Filter button.
Transpose
By default, the attributes of the data are shown on the left side (row headings). If you prefer, you can transpose the data so that the attributes are along the top of the table (column headings). To do this, simply click the Transpose button.
Export
Column actions
Here are column actions you can perform.
Resizing columns
You can resize a column by simply dragging the border between two columns, just as you would in Excel.
You can also double-click, which will resize the column to the width needed to display all cells in that column in one line, just like Excel.
Rearranging columns
You can move a column left or right by simply clicking & dragging the column heading cell.
When you click and drag the column heading, the 
symbol appears. This indicates that where you have the cell is not (yet) a drop target:
Once you drag the cell left or right near to where you want to move the column to, the drop target appears (see the yellow highlight in the image below) and the symbol changes to a 
symbol, indicating that it is a valid drop target. Release the mouse and the column moves to the new position.
Hiding columns
You can hide one or more columns by clicking the ˅ symbol in the column heading then clicking Columns. You can then deselect any columns you wish to hide (or select them to show them again)
Hiding (filtering) rows or columns
You can filter out data based on specific values of attributes by clicking the ˅ symbol in the row or column heading and clicking Filter. You can then click the values you wish to show.
Tip: The Filter menu appears at the attribute heading. By default, this is the row headings, however if you transpose the data (click the Transpose button), then the Filter menu appears in the column heading instead.
Sorting data
To sort the displayed data alphabetically based on one specific column, there are two ways:
- Click the column heading once to sort ascending or a second time to reverse the sort
- Click the ˅ symbol in that column heading and click Sort Ascending or Sort Descending
